18" Tracks, IVT, 10" Colour Display, Prem Command U3 Cab, 60 Gal 85CC Pump, 6 Hyd, 4 Front Idlers, Poly Midrollers, Prem Lights, Leather Trim, 22 Front Weights
- 2018
- John Deere
- 8370RT
- Base
- Row Crop
- at 2100 rpm (97/68EC): 370 hp (272 kW) | at 1900 rpm (97/68EC): 407 hp (299 kW)
- John Deere PowerTech™ PSS 9.0 L
- 2,100 rpm
- Diesel
- in-line, 6, wet-sleeve with 4 valve-in-head
- Dual series turbocharger with fixed geometry first stage, variable geometry second stage; air-to-air aftercooling and cooled exhaust gas recirculation
- Dual-stage with engine cooling fan aspiration
- 549 cu. in. (9.0 L)
- 16.0:1
- Full-pressure, full-flow filtration with bypass
- Replaceable cartridge-style oil filter
- 4.66 in. (118 mm)
- 5.35 in. (136 mm)
- for 36,000 lb. (16 067 kg) vehicle 16 in. (406 mm): 11.36 psi (78.59 kPa) | 18 in. (457 mm): 10.1 psi (69.87 kPa) | 24 in. (609 mm): 7.57 psi (52.40 kPa) | 25 in. (635 mm): 7.27 psi (50.30 kPa) | 30 in. (762 mm): 6.06 psi (41.91 kPa)
- Filter: Two-stage with water separator and serviceindicator light | Filter, primary: 10 micron spin-on element with water indication sensor and drain | Filter, secondary: 2 micron spin-on element
- Electronically controlled, high-pressure commonrail with electric fuel transfer pump (self priming) | Required: Ultralow sulfur diesel (B20 diesel compatible)
- PTO: 39%
- at 2,100 rpm: 308 hp (229 kW) | 1,000 PTO rpm at 2,000 engine rpm
- Bulge: 10% | 1 3 /4 in. (44 mm) 20-spline, 1,000 rpm
- Inboard planetary | John Deere AutoPowr™ IVT™ 26 mph (42 km/h): 42 km/h at 1,550 ECO erpm
- Closed-center, pressure and flow compensated | Selective control valves (SCVs) with 1 /2 in. ISO couplers: 4 Standard |
- Main, axial piston (displacement): 85 cc standard
- 2,958 + /- 4.4 psi (20,400 + /- 300 kPa)
- Rated 85 cc pump: 60 U.S. gpm (227.1 L/min)
- Power, hydraulic wet-disk with retractors -powered back-up
- /Battery: 200 amps/12 Volt
- Two batteries in parallel | Total cold-cranking amps: 1850
- Drive total width: 15 in. (381 mm) required with 16-, 18-, and 24-in. (406, 457, and 610 mm) tracks | Mid-rollers total width 15 in. (381 mm) required with: 16-, 18-, and 24-in. (406, 457, and 610 mm) tracks; 24 in. (610 mm) required with 25-, and 30-in. (635, and 762 mm) tracks
- Tread spacing: 72 to 120 inch (1,829 to 3,048 mm)
- Camoplast Durabuilt 3500 and 5500 Series Track Belts
- 25 in. (635 mm)
- GROUND CONTACT AREA 16 in. (406 mm): 3,168 sq. in. (2.04 sq. m) | 18 in. (457 mm): 3,565 sq. in. (2.30 sq. m) | 24 in. (609 mm): 4,753 sq. in. (3.07 sq. m) | 25 in. (635 mm): 4,951 sq. in. (3.19 sq. m) | 30 in. (762 mm): 5,941 sq. in. (3.83 sq. m)
- Length: 99 in. (2515 mm)
- Speed-sensitive, hydrostatic, differential
- 200 U.S. gal (758 L)
- 3 Point Lower draft shaft bending bar, electrohydraulic sensing | Category 4N/3 with Quik-Coupler: 20,000 lb. (9,702 kg) - Maximum Lift Capacity 28,136 lb (12,762 kg)
- DEF: 6.7 U.S. gal (25.3L)
- With IVT, full fuel, 25-in. (635 mm) tracks, no weights: 36,549 lb. (16,578 kg)
- AutoTrac™ Ready | ServiceADVISOR™ Remote: Requires activated JDLink service | CommandCenter™ Display video with 4600 Processor: Video capable; four video inputs (Tyco Connector PN 776536-1) for camera with PAL or NTSC signal
- 1RW8370RPJD918301
- $489,000.00
- Carman, Manitoba
- Pre-Owned
- 12222
- 2018
- John Deere
- 8370RT
- 2298
- Inboard planetary | John Deere AutoPowr™ IVT™ 26 mph (42 km/h): 42 km/h at 1,550 ECO erpm
- Electronically controlled, high-pressure commonrail with electric fuel transfer pump (self priming) | Required: Ultralow sulfur diesel (B20 diesel compatible)
- Available
- 1RW8370RPJD918301